Cargo ship with containers on open water, seen from above.

News & Media

Close-up of marine water treatment system with pipes and valves.

Type of Ballast Water Treatment System: UV, EC and TRO

Compare each type of ballast water treatment system: filtration + UV, electrochlorination and chemical injection. TRO, holding time and fit by ship.
Large industrial marine equipment with pipes and valves in workshop.

What Is a Ballast Water Treatment System (BWTS)?

What a ballast water treatment system (BWTS) is, how it works on a ship from intake to discharge, the main types, IMO D-2 rules and common failures.
Pressure gauge on a marine engine with a needle pointing to 1.5 bar.

Main Engine Lube Oil Pressure Drops While Running: What Is Happening and What to Do First

The alarm sounds at 02:40. The standby pump cuts in. Pressure recovers. The duty engineer logs it as a pump changeover and the vessel continues. Six hours later, the standby…
Precision grinding equipment on a ship's crankshaft.

In-Situ Crankshaft Grinding: When It Saves You Money and When It Does Not

A bulk carrier arrives in port with a seized main bearing. The crankshaft journal is scored. The superintendent gets two quotes. The first is for crankshaft removal, workshop transport, and…
Close-up of a marine cylinder liner showing signs of scuffing and wear.

Cylinder Liner Scuffing: What Actually Happens When the Oil Film Breaks Down

A chief engineer opens the scavenge space for a routine inspection. He shines a light up at the liner wall. Instead of a smooth, even surface, he sees long vertical…
Large vessel in dry dock with cranes and equipment around it.

When Does an Engine Overhaul Trigger NOx Re-Certification?

A vessel came out of drydock with a freshly overhauled main engine. New fuel injectors. Reground fuel pump plungers. Cleaned combustion chambers. The chief engineer signed off the work as…